The Solution: ECP Helical Tie-Backs and Carbon Fiber
Helical Tie-Backs and Carbon Fiber from ECP are designed to reinforce retaining walls, providing a robust and long-lasting fix.
-
Helical Tie-Backs: These are large, screw-like anchors driven deep into the stable soil behind the retaining wall. They stabilize the wall by counteracting lateral earth pressures.
-
Carbon Fiber: Carbon fiber strips are used to reinforce the wall’s surface. This high-strength material bonds to the wall, effectively preventing further bowing or cracking.
Step-by-Step Repair Guide
-
Assessment and Preparation:
-
Inspect the retaining wall for damage.
-
Determine the extent of bowing or cracking.
-
Clear the area around the wall to create a safe working environment.
-
-
Installing Helical Tie-Backs:
-
Drill holes through the retaining wall at predetermined intervals.
-
Insert the Helical Tie-Back anchors and drive them deep into the soil behind the wall using specialized equipment.
-
Attach wall plates to the ends of the Tie-Backs, which distribute the load and pull the wall back into alignment.
-
-
Applying Carbon Fiber Strips:
-
Clean and prepare the wall surface to ensure optimal adhesion.
-
Apply an epoxy adhesive to the back of the Carbon Fiber strips.
-
Press the strips firmly onto the wall, ensuring full contact with the adhesive.
-
Allow the epoxy to cure as per manufacturer’s instructions.
-
-
Final Touches:
-
Inspect the repaired wall to ensure stability.
-
Backfill any excavated areas and restore the landscape.
-
Maintain regular inspections to monitor the wall’s condition.
-
